SIMCO HOLDINGS LIMITED · HONGKONG. SHANDONG. TIANJIN
WhatsApp

CRC Cold Rolled Steel Coil

Cold rolled steel coil for forming, stamping and general fabrication

CRC Cold Rolled Steel Coil — SIMCO steel coil supply
01 / DEFINITION

Product overview

CRC is produced by reducing hot-rolled steel through cold rolling to achieve the required thickness, surface quality and dimensional accuracy. Depending on the grade and finishing route, CRC can be supplied for drawing, bending, forming and general fabrication.

Its smooth surface and controlled dimensions also make it a suitable substrate for galvanizing and colour-coating processes.

02 / STANDARDS & GRADES

Standards & grades

Standard systemGrades supplied
JIS G3141SPCC, SPCD, SPCE, SPCF340, SPCF390, SPCF440
JIS G3135SPCF340 to SPCF440 (high-strength forming grades)
EN 10130DC01, DC03, DC04
ASTM / SAEASTM A1008; A424 Type II; SAE 1006, SAE 1008
JIS G3141 full hardSPCC-1B, SPCC-1D — grades confirmed against the producing mill

Grade availability is confirmed against the producing mill before quotation. Please state the required standard when sending your RFQ.

03 / DIMENSIONS & PARAMETERS

Dimensions & parameters

ParameterRange / valueConfirmed before ordering
Thickness0.20–3.00 mmSubject to grade and mill availability
WidthConfirmed against order requirementsFull coil or slit coil
Slit coilAvailable; narrowest width subject to specificationConfirmed per order
Surface finishDull or bright; oiled or dryConfirmed per order
Coil weight / ID3–14 t / 508 or 610 mmConfirmed per order
Minimum order quantity25 tonnes per size · 100 tonnes per orderConfirmed against mill requirements
Loading portTianjin / JingtangSubject to order

Minimum order quantity: 25 tonnes per size · 100 tonnes per order. Final specification and availability are confirmed against the selected mill before order acceptance.

04 / TYPICAL APPLICATIONS

Typical applications

01

Re-rolling & coating substrate

Base material for hot-dip galvanizing, Galvalume and continuous colour-coating lines.

02

Precision stamping & deep drawing

Internal brackets, washing machine drums, refrigerator back panels and electrical enclosures (DC03 / DC04 / SPCE).

03

Tube & pipe mills

Narrow slit strip for welded furniture tubes, precision mechanical tubing and steel drums.

04

Metal furniture & office equipment

Filing cabinets, lockers, shelving systems and powder-coated steel doors.

05

Automotive-related components

Non-exposed structural stampings, seat frames and filter housings, subject to grade approval.

05 / PRODUCT FAQ

Product FAQ highlights

01

Soft versus full-hard CRC: how the choice affects forming.

Full-hard coil is supplied unannealed for strength-critical parts with limited forming; soft annealed grades are used where drawing or bending is required. The temper, grade and forming route are confirmed against the part being made.

02

Selecting drawing grades such as DC04 or SPCE for stamping.

Deep-drawing grades follow the severity of the formed shape: DC01 for simple bends, DC03–DC04 and SPCE where draws are deeper or thickness control is tighter. Share the part drawing and the grade is confirmed.

03

Dull versus bright surface finish for painting or plating.

Dull finish gives a better key for paint and adhesive; bright finish suits visible parts and plating. Oiling is agreed separately according to handling and transit.

04

Slitting and narrow-width strip requirements down to 20 mm.

Slit coil is produced from the mother coil to the ordered width, with edge condition and width tolerance agreed before production. Narrow widths are confirmed per order.

— Related products

Keep comparing.

All products →

Discuss your next steel coil order.

Send your product specification, quantity and destination port. SIMCO will review the sourcing options for your inquiry.