Exposed architectural roofing
Standing-seam roofs, ribbed roofing profiles and long-span commercial roofs (G300–G550).
Prepainted aluminium-zinc coated steel coil for exposed roofing and facades
PPGL is prepainted steel coil produced on an aluminium-zinc coated substrate. The metallic coating provides corrosion resistance, while the factory-applied paint system provides colour, surface protection and the required appearance.
PPGL is commonly considered for exposed roofing and exterior cladding applications, particularly where weatherability and solar reflectance are important.
| Standard system | Grades supplied |
|---|---|
| JIS G3312 | CGCC, CGC340, CGC400, CGC440, CGC490, CGC570 |
| ASTM A755M | Selected commercial and structural grades |
| Substrate — JIS G3321 | SGLCC, SGLC400, SGLC440, SGLC490, SGLC570 |
| Substrate — EN 10346 | DX51D+AZ, DX53D+AZ, S250GD to S550GD |
| Substrate — ASTM A792M | CS Type B; SS Grade 255 to 550 |
Grade availability is confirmed against the producing mill before quotation. Please state the required standard when sending your RFQ.
| Parameter | Range / value | Confirmed before ordering |
|---|---|---|
| Thickness | 0.19–2.00 mm | Subject to producing mill |
| Width | 600–1500 mm | Full coil; slit coil available |
| Slit coil | Available subject to order | Confirmed per order |
| Substrate metallic coating | AZ30–AZ150 g/m² | Total both sides; subject to mill availability |
| Paint system | RMP (PE) / SMP / HDP / PVDF | Subject to availability |
| Film thickness | Confirmed according to paint system and application | Topcoat and backcoat |
| Colour | RAL reference or approved physical sample | Confirmed per order |
| Gloss | Confirmed per order | Typical range confirmed at quotation |
| Coil weight / ID | 3–14 t / 508 or 610 mm | Confirmed per order |
| Minimum order quantity | 25 tonnes per size · 100 tonnes per order | Confirmed against mill requirements |
| Loading port | Tianjin / Qingdao | Subject to order |
Minimum order quantity: 25 tonnes per size · 100 tonnes per order. Final specification and availability are confirmed against the selected mill before order acceptance.
Standing-seam roofs, ribbed roofing profiles and long-span commercial roofs (G300–G550).
Roofs and upper facades in the Middle East, Latin America, Africa and Southeast Asia that require solar reflectance.
Terminals, exhibition halls, logistics hubs, railway stations and sports facilities.
Architectural cassettes and louver systems, where HDP or PVDF systems are specified.
Roof sheets for food-processing plants, warehouses and production facilities.
PPGL is the usual choice for exposed roofs because the aluminium-zinc substrate resists atmospheric corrosion longer than zinc alone, particularly at cut edges and fasteners.
Coating mass and paint system are chosen together for the climate: a higher AZ mass with HDP or PVDF where UV, salt or heat exposure is significant.
Facade work usually calls for a controlled gloss band and consistent colour across batches. Both are confirmed at quotation.
Sea freight requires moisture protection: VCI wrap, desiccant where agreed, and edge protection, with packing confirmed for the destination and handling.

Cold rolled steel coil for forming, stamping and general fabrication. Soft and full-hard grades, multiple thicknesses and widths, with slit coil options. Made-to-order supply from SIMCO.

Galvalume steel coil with aluminium-zinc coating for roofing, wall cladding and industrial applications. Multiple thicknesses, coating masses and slit coil options.

PPGI steel coil with galvanized substrate and factory-applied paint systems. Colour, coating, film thickness and dimensions confirmed to order.
Send your product specification, quantity and destination port. SIMCO will review the sourcing options for your inquiry.