HVAC & ventilation ductwork
Lock-forming quality (LFQ) coils for spiral ducts, rectangular air ducts and exhaust hoods.
Hot-dip galvanized steel coil for roofing, profiles, ductwork and fabrication
GI is steel coil coated with zinc through a continuous hot-dip galvanizing process. The zinc coating provides corrosion protection, while the selected steel grade and coating mass determine its suitability for forming, fabrication and the intended service environment.
Coating mass, surface treatment and spangle requirements are selected according to the downstream process and application.
| Standard system | Grades supplied |
|---|---|
| JIS G3302 | SGCC, SGC340, SGC400, SGC440, SGC490, SGC570, SGHC, SGCD1–SGCD4 |
| ASTM A653M | CS Type A/B/C, FS, DDS, EDDS, SS Grade 230 to 550 |
| EN 10346 | DX51D+Z, DX53D+Z, S250GD to S550GD |
| AS 1397 | G250, G300, G350, G450, G550 |
Grade availability is confirmed against the producing mill before quotation. Please state the required standard when sending your RFQ.
| Parameter | Range / value | Confirmed before ordering |
|---|---|---|
| Thickness | 0.12–3.00 mm | Subject to grade and mill availability |
| Width | 600–1500 mm | Full coil; slit coil available |
| Slit coil | Available; narrowest width confirmed per order | Confirmed per order |
| Zinc coating mass | Selected coating masses confirmed against the producing mill | State total or single-side basis |
| Surface treatment | Passivated, chromate-free, oiled or other agreed treatment | Confirmed per order |
| Spangle | Regular or zero spangle | Subject to availability |
| Coil weight / ID | 3–14 t / 508 or 610 mm | Confirmed per order |
| Minimum order quantity | 25 tonnes per size · 100 tonnes per order | Confirmed against mill requirements |
| Loading port | Tianjin / Jingtang / Qingdao | Subject to order |
Minimum order quantity: 25 tonnes per size · 100 tonnes per order. Final specification and availability are confirmed against the selected mill before order acceptance.
Lock-forming quality (LFQ) coils for spiral ducts, rectangular air ducts and exhaust hoods.
C/Z purlins, drywall studs, tracks, suspended ceiling grids and deck flooring (G350–G550).
Perforated cable trays, trunking, junction boxes and switchgear cabinets.
Grain silos, poultry feeding troughs, greenhouse framing and fencing.
Zero-spangle GI for garage doors, rolling shutters and appliances that are powder-coated after forming.
Regular spangle shows the visible zinc crystal pattern and suits unpainted structural and roofing use; zero spangle gives a smoother, more uniform surface for painting or powder coating.
Coating mass is normally stated as total both sides, confirmed per order against the producing mill. Where a single-side basis is required, it must be stated explicitly so quotations compare like with like.
Passivation is chosen for storage and handling: chromate-free treatment is usual where paint adhesion and environmental compliance matter, while Cr3+ passivation supports longer storage.
Slit GI is supplied to the line width required by tube mills and roll-formers, with edge quality and packing agreed for the handling route.

Cold rolled steel coil for forming, stamping and general fabrication. Soft and full-hard grades, multiple thicknesses and widths, with slit coil options. Made-to-order supply from SIMCO.

Galvalume steel coil with aluminium-zinc coating for roofing, wall cladding and industrial applications. Multiple thicknesses, coating masses and slit coil options.

PPGL steel coil with aluminium-zinc substrate and factory-applied paint systems for roofing, cladding and industrial buildings. Colour and specifications confirmed to order.
Send your product specification, quantity and destination port. SIMCO will review the sourcing options for your inquiry.