Architectural wall cladding
Roll-formed exterior wall panels, soffits, fascia boards and warehouse siding.
Prepainted galvanized steel coil for roofing, cladding and appliances
PPGI is galvanized steel coil with a factory-applied paint system. The zinc coating provides metallic corrosion protection, while the paint layers provide colour, appearance and additional surface protection.
The substrate, paint system, film thickness, gloss and colour are selected according to the intended application and forming process.
| Standard system | Grades supplied |
|---|---|
| JIS G3312 | CGCC, CGC340, CGC400, CGC440, CGC490, CGC570 |
| ASTM A755M | Selected commercial and structural grades |
| Substrate — JIS G3302 | SGCC, SGC340, SGC400, SGC440, SGHC |
| Substrate — EN 10346 | DX51D+Z, DX53D+Z, S250GD to S550GD |
| Substrate — ASTM A653M | CS Type A/B/C, FS, DDS, SS Grade 230 to 550 |
Grade availability is confirmed against the producing mill before quotation. Please state the required standard when sending your RFQ.
| Parameter | Range / value | Confirmed before ordering |
|---|---|---|
| Thickness | 0.12–1.50 mm | Subject to producing mill |
| Width | Confirmed against order requirements | Full coil; slit coil available |
| Slit coil | Available subject to specification | Confirmed per order |
| Zinc coating | Confirmed against substrate and order requirements | State required coating mass |
| Paint system | RMP (PE) / SMP / HDP / PVDF | Subject to availability |
| Film thickness | Confirmed according to paint system and application | Topcoat and backcoat |
| Colour | RAL reference or approved physical sample | Confirmed per order |
| Gloss | Confirmed per order | Typical range confirmed at quotation |
| Coil weight / ID | 3–14 t / 508 or 610 mm | Confirmed per order |
| Minimum order quantity | 25 tonnes per size · 100 tonnes per order | Confirmed against mill requirements |
| Loading port | Tianjin / Qingdao | Subject to order |
Minimum order quantity: 25 tonnes per size · 100 tonnes per order. Final specification and availability are confirmed against the selected mill before order acceptance.
Roll-formed exterior wall panels, soffits, fascia boards and warehouse siding.
Pre-finished skins for PIR, PUR, EPS and rockwool cold-room and cleanroom panels.
Side wrappers and doors for refrigerators, washing machines, air conditioners and water heaters.
Suspended ceiling panels, modular partitions, elevator cabins and steel doors.
Slit and roll-formed slats that require high paint flexibility without cracking.
PPGI uses a galvanized substrate and suits wall cladding, appliances and general roofing; PPGL uses an aluminium-zinc substrate where longer exposure life and heat reflectivity matter.
Colour is matched to a RAL reference or an approved physical sample. For repeat orders the approved standard stays on file, so colour is not re-approved each time.
PE is the general-purpose system, SMP improves flexibility and hardness, HDP suits exterior building work, and PVDF is specified where UV and chemical exposure are severe.
Film thickness is agreed with the paint system and the severity of forming; a heavier backcoat is used where the reverse side sees humidity or handling.

Cold rolled steel coil for forming, stamping and general fabrication. Soft and full-hard grades, multiple thicknesses and widths, with slit coil options. Made-to-order supply from SIMCO.

Galvalume steel coil with aluminium-zinc coating for roofing, wall cladding and industrial applications. Multiple thicknesses, coating masses and slit coil options.

PPGL steel coil with aluminium-zinc substrate and factory-applied paint systems for roofing, cladding and industrial buildings. Colour and specifications confirmed to order.
Send your product specification, quantity and destination port. SIMCO will review the sourcing options for your inquiry.