SIMCO HOLDINGS LIMITED · HONGKONG. SHANDONG. TIANJIN
WhatsApp

PPGI vs GI: which coil should you order?

Published 2026-11-03

GI and PPGI both use zinc-coated steel substrates, but differ in surface finish and protection.

GI has a zinc coating. PPGI adds primer, topcoat and back coat through a continuous coil-coating process, providing colour and additional surface protection.

1. Key Differences

GI (Galvanized Steel) relies on its zinc coating for corrosion protection. Zinc also provides sacrificial protection at scratches and exposed cut edges.

PPGI (Pre-Painted Galvanized Steel) combines zinc protection with an organic paint system. The paint adds a barrier against environmental exposure and gives the steel its finished colour and appearance.

2. Typical Applications

GI (Galvanized Steel)PPGI (Pre-Painted Galvanized Steel)
Ductwork and ventilationRoofing and wall cladding
Cable traysSandwich panels
Structural componentsGarage doors and roller shutters
Appliance componentsPre-painted appliance panels
Parts requiring further paintingProducts requiring a finished colour

These are common applications, not strict limits. The choice depends on product design and processing requirements.

3. Cut Edges and Forming

Cutting exposes the steel substrate in both products. Zinc can provide sacrificial protection at exposed cut edges. Its effectiveness depends on coating mass, cut-edge dimensions and exposure conditions.

PPGI must also withstand forming without cracking, peeling or losing adhesion. The steel grade and paint system (e.g. PE, SMP, HDP or PVDF) should match the forming process and local climate.

For roofing and cladding, proper edge treatment, suitable fasteners and drainage details help reduce corrosion risks.

4. What Should You Specify in Your RFQ?

For GI:

  • Steel grade, thickness and width
  • Zinc coating mass (total on both sides)
  • Surface finish (spangle type and surface treatment)
  • Dimensional tolerances and coil weight
  • Quantity, destination port and trade terms (FOB / CFR / CIF)

For PPGI:

  • Steel grade, thickness and width
  • Zinc coating mass (total on both sides)
  • Paint system (e.g. PE / SMP / HDP / PVDF) and film thickness
  • Colour and gloss
  • Dimensional tolerances and coil weight
  • Quantity, destination port and trade terms (FOB / CFR / CIF)

PPGI colour should be confirmed by RAL reference or physical sample. A production sample should be approved before full production. Approved samples or colour standards should be retained for consistent repeat orders.

Which One Should You Order?

Choose GI when a zinc-coated surface meets the application requirements or further painting will be carried out after fabrication.

Choose PPGI when the finished product requires factory-applied colour and additional surface protection.

Compare the complete specifications, not just the price per tonne.

SIMCO GI and PPGI Supply

SIMCO supplies GI and PPGI steel coils for construction, roofing, appliances and industrial applications across Latin America, Africa, the Middle East and Asia-Pacific. Backed by our manufacturing base in Shandong and qualified mill partners, we arrange specifications according to each order.

← Back to Insights
— Read more

Latest insights